TASCAM DM-24 Installation and Use Owners Manual - Page 42
Setting up the I/O-Output assignments
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
5 - Setting up the I/O-Output assignments Output assignments The buss settings and the aux sends 1 through 4 may be routed to the three internal TDIF slots, as well as to the ADAT output and any slot cards fitted. The output grouping destinations are grouped in output blocks of eight signals. Block sources (busses, direct outputs or aux sends) are mapped to these blocks. The blocks are grouped together, and the block sources are sent in parallel to all blocks in the group The eight output busses are assigned on a one-to-one basis to the outputs within a block (that is, buss 1 will feed channel 1 of the output block, etc.is Digital outputs The two DIGITAL OUTPUTs may output: the stereo outputs (STEREO), a pair of busses (BUSS1-2, BUSS3- 4, BUSS5-6, or BUSS7-8), a pair of aux sends (AUX1-2, AUX3-4, AUX5-6) or the control room signal (C.ROOM). The XLR and RCA connectors for each output are fed in parallel with the selected signal, and the format NOTE The more recent models of TASCAM DTRS recorder have an internal patchbay which allows you to reassign inputs to tracks. If a direct out has been selected in the assignments ("Channel-to-buss assignments (global)" on page 40), this will take priority over the buss outputs (the appropriate buss output will not be selected for the block/channel combination used by the direct outs). The composition of the output blocks, and the choices for the block sources are: Block Output block groups Block Source options 1 TDIF 1 (1-8) Slot 1 (1-8) Slot 2 (1-8) Buss 1-8 / Direct out 1-8 Aux 1-4 Parallel (paralleled 1->1&5, 2->2&6, etc.) 2 TDIF 2 (9-16) Buss 1-8 / Direct out 9-16 Slot 1 (9-16) Aux 1-4 Parallel (paralleled Slot 2 (9-16) 1->1&5, 2->2&6, etc.) 3 TDIF 3 (17-24) Buss 1-8 / Direct out 1-8 ADAT (17-24) Buss 1-8 / Direct out 9-16 Slot 1 (17-24) Aux 1-4 Parallel (paralleled Slot 2 (17-24) 1->1&5, 2->2&6, etc.) In the I/O OUTPUT sub-screen, use the dial and ENTER key to select the source for each output block. is determined in the DIGITAL FORMAT screen ("Digital output" on page 26). Move the cursor to the appropriate field (DIGITAL OUT1 or DIGITAL OUT2) on the left of the screen, Use the dial and ENTER key to select the desired output signal. 42 TASCAM DM-24 Reference Manual