TASCAM DM-24 Installation and Use Owners Manual - Page 65
Dynamics processors-DYNAMICS master channels
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
8 - Dynamics processors-DYNAMICS (master channels) DYNAMICS (master channels) The screen accessed by the DYNAMICS key when a master channel (an aux send, a buss or the stereo master) is selected is slightly different from the screen displayed when a channel 1-16 is selected: Assigning processors to master channels The assignment of stereo compressors to up to three master channels is done using the I/O display ASSIGN SECT. sub-screen The screen above shows two linked aux sends (1 and 2), but the same principle applies to buss masters as well as the stereo master. Note that the following features are different from the channel 1-16 dynamics screens: No expander or gate available for these mas- ter screens. Any on-screen controls associated with these processors are therefore unavailable. This includes the soft keys-only the compressor library is available from these screens. Insert point The insert point is fixed to pre-fader. Linking The way in which the links are labeled is different for master modules. Instead of the channels being referred to as left and right, they are referred to as 1and 2 ("left" and "right" do not have any real meaning in these cases). Use the fourth soft key to bring up the master assignment section. Move the cursor to the second column (MASTER COMP INSERT MATRIX), and use the dial to assign the possible master channels (confirm with ENTER). NOTE The stereo master counts as two channels, as shown in the sample screen here. TASCAM DM-24 Reference Manual 65