TASCAM DM-24 Installation and Use Owners Manual - Page 5

Output assignments 42 Digital outputs 42 Assignable sends and returns 43 Master compressors 43 6 - Hookup Analog connections 44 MIC/LINE connections 44 External dynamics processors and effectors .......45 Analog monitoring and mastering 45 Digital connections 46 DTRS recorder connections 46 ADAT connections 47 Digital inputs and outputs 47 Synchronization and control connections 47 Word sync clock connections 48 MIDI connections 48 SMPTE/EBU timecode connections 48 Meter unit 48 P2 connections 48 7 - Module operations Selecting modules 49 Common area indicators and controls ......50 Dynamics controls 50 Gate/Expander 50 Compressor 50 Compressor insert point 50 Dynamics meter 50 Other common controls and displays 51 Digital trim and pan 51 Phase switch 51 Assignable inserts 51 Input/return assignments 51 Meter 51 EQ and buss assignments 51 Fader section 51 Mute and fader groups 51 Digital trim control 51 Pan control 51 Balance controls for stereo linked pair 52 Global pan 52 Ganging 52 Setup 52 Dynamics screen 53 Noise gate (GATE 53 Compressor 53 Expander 53 EQ 54 On/off (all bands 54 Gain (all bands 54 Frequency range (all bands 54 Q (all bands 54 EQ band type 54 High band 54 High-mid band 54 Low-mid band 55 Low band 55 EQ library 55 Aux sends 55 Aux sends (global 55 Fader control 56 Setup 56 Copy 56 Table of Contents Source (pre/post and SOURCE) settings 56 Setup 56 Linked aux sends 56 Setup screen 57 Channel source (CH SOURCE 58 Gate switch (GATE SW 58 Aux 1 and 2 source (AUX 1-2 SOURCE 58 Compression insert (COMP INSERT 58 Compressor switch (COMP SW 58 Assignable insert position (ASSIGN INSERT) .........58 Assignable insert switch (ASSIGN INS SW 58 Phase switch 58 Digital delay time (DELAY 58 Digital delay units (UNIT 59 Digital trim and delay (global 59 Global digital trim 59 Fader control 59 Setup 59 Global digital delay 59 Unit 60 Fader control 60 Setup 60 PRE/POST 60 Linked modules 60 Channels 60 Master modules 60 Linking and unlinking modules 60 Stereo linking (global 61 Screens for linked modules 61 Phase 61 Pan 61 Mono switch (MONO SW 61 UTILITY copying 62 8 - Dynamics processors Turning the processors on and off 63 DYNAMICS (input channels 1-16 63 Selecting a gate or an expander 63 "Master" settings 64 GATE/EXPAND 64 LINK L->R 64 Trigger source 64 Compressor 64 Insert point 64 LINK L->R 64 Trigger source 64 Soft keys (library 64 DYNAMICS (channels 17-32 64 DYNAMICS (master channels 65 No expander or gate 65 Insert point 65 Linking 65 Assigning processors to master channels 65 Dynamics diagram 66 Gates/expanders 66 Gate 66 Threshold 66 Range 66 Hysteresis 66 Gate attack time 66 Gate hold time 66 Gate decay time 66 Expander 66 Threshold 66 Ratio 66 TASCAM DM-24 5