TASCAM DM-24 Installation and Use Owners Manual - Page 66
Dynamics processors-Dynamics diagram
![]() |
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
8 - Dynamics processors-Dynamics diagram Dynamics diagram The following display provides a graphical representation of the compressor settings, as shown below. As the signal is fed through the compressor, bargraph meters are shown on the appropriate scale: Gain reduction Output levels Input levels Compressor "knee" Gates/expanders The following parameters affect the gate and expander, if these have been assigned to the selected channel. Gate Threshold (THRESH), controlled by the POD 1 knob, allows the setting of the threshold at which the gate will open. Variable from -80dB to 0dB in 1dB steps. Range (RANGE), controlled by the POD 2 knob, sets the gate range, from 60dB to 0dB in 1dB steps. Hysteresis (HYST), controlled by the POD 3 knob, from 0dB to 24dB in 1dB steps. Gate attack time (ATTACK), controlled by the POD 1 knob on the last row. Variable from 0ms to 125ms in 1ms steps. Expander Threshold The threshold of the expander function, from -48dB to 0dB, in 1dB steps. Ratio The ratio of the original signal relative to the expanded signal. Values are 1:1, 1:2, 1:4, 1:8, 1:16, 1:32, 1:64. Attack The attack time of the expansion effect. From 0ms to 125ms in 1ms steps. Gate hold time (HOLD), controlled by the POD 2 knob on the last row. Variable from 0ms to 990ms in 100 steps. Gate decay time (DECAY), controlled by the POD 3 knob on the last row. Variable from 50ms to 5.0s. From 5ms to 200ms, the steps are 5ms apart; from 200ms to 300ms, the steps are 10ms apart; from 300ms to 500ms, the steps are 20ms apart; from 500ms to 1.00s, the steps are 50ms apart; from 1.00s to 3.00s, the steps are 0.1s apart; and from 3.00s to 5.00s the steps are 0.2s apart. Release The release time of the expansion effect. From 5ms to 5.00 seconds. From 5ms to 200ms, the steps are 5ms apart; from 200ms to 300ms, the steps are 10ms apart; from 300ms to 500ms, the steps are 20ms apart; from 500ms to 1.00s, the steps are 50ms apart; from 1.00s to 3.00s, the steps are 0.1s apart; and from 3.00s to 5.00s the steps are 0.2s apart. 66 TASCAM DM-24 Reference Manual
![](/manual_guide/products/tascam-dm24-installation-use-owners-manual-b6acfed/66.png)