TASCAM DM-24 Installation and Use Owners Manual - Page 78
Monitoring-Meters and faders
![]() |
View all TASCAM DM-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
10 - Monitoring-Meters and faders 24 channels or a screen with channels 25 through 32, aux sends 1 through 6 and busses 1 through 8: The SEL Key Follows Fader Layer allows the setup of the automatic linking of the selected channel to the selected meter layer. When this option is selected, if a channel is selected, the fader layer is changed, and then the fader layer is changed back again, the originally-selected channel is automatically selected. For example, if this option is active, and SEL 2 key is lit with fader layer 1-16 active, fader layer 17-32 is Master meters As well as the option described immediately above, pressing soft key 3 in the METER/FADER display provides a view of the master meters and faders as shown here: then selected, SEL key 3 (channel 19) is selected, and then fader layer 1-16 is then re-selected, SEL key 2 will be active. If the option is not active, any SEL key which is lit remains lit when the fader layer is changed. For example, if this option is not selected, and SEL key 2 is lit with fader layer 1-16 active, and fader layer 1724 is then selected, SEL key 2 will still be lit (that is, channel 18). When the Meter Follows SEL key option is checked, the meter layer automatically changes when an appropriate SEL key is pressed. The modes are as follows: Fader layer CH 1-16 CH 17-32 MASTER SEL keys Meter layer CH 1-16 CH 1-24 CH 17-24 CH 1-24 CH 25-32 MASTER/CH 25-32 Buss 1-8/Aux1-6/Stereo MASTER/CH 25-32 NOTE If the FADER->METER Follow option is checked, and the SEL Key Follows Fader Layer is not checked, the meter follow option will not be enabled. These settings can also be made in the OPTION PREFERENCES sub-screen ("PREFERENCES" on page 21). The METERING POINT can be set (ENTER key, dial and ENTER key) in the same ways as described earlier (here the options are described as PRE (pre-fader), POST (post-fader) and INPUT (input)). Changes made here are reflected in the METER screen and vice versa. Use the SEL or cursor keys to move the box cursor around the screen in groups of 4 modules, and the PODs to set the fader values. 78 TASCAM DM-24 Reference Manual
![](/manual_guide/products/tascam-dm24-installation-use-owners-manual-b6acfed/78.png)