TP-Link Archer VR400 Archer VR400EU V1 User Guide - Page 71
Con the DHCPv6 Server Address Type, RADVD, Site Prefix Type, Delegated, Static
View all TP-Link Archer VR400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Chapter 12 3. Select IPv6 to configure IPv6 LAN parameters. Specify Your Network Settings 1 ) Select the RADVD address type to make the modem router assign IPv6 address prefixes to hosts. Note: Do not select the Enable RDNSS and Enable ULA Prefix check boxes unless required by your ISP. Otherwise you may not be able to access the IPv6 network. For more information about RDNSS and ULA Prefix, contact our technical support. 2 ) Keep Site Prefix Type as the default value Delegated. If your ISP has provided a specific IPv6 site prefix, select Static and enter the prefix. 3 ) Keep Prefix Delegated WAN Connection as the default value. 4. Click Save to make the settings effective. 12. 2. 2. Configure the DHCPv6 Server Address Type 1. Visit http://tplinkmodem.net, and log in with the password you set for the modem router. 2. Go to Advanced > Network > LAN Settings. 3. Select IPv6 to configure IPv6 LAN parameters. 67