TP-Link EAP225-Wall Omada Controller Software 3.0.5 Windows/Linux User Guide - Page 114
IP Setting, Get a Dynamic IP Address From the DHCP Server
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
5.4.2 IP Setting You can configure an IP address for this EAP. Two options are provided: DHCP and Static. Get a Dynamic IP Address From the DHCP Server 1. Configure your DHCP server. 2. Select DHCP on the page above. 3. Enable the Fallback IP feature. When the device cannot get a dynamic IP address, the fallback IP address will be used. 4. Set IP address, IP mask and gateway for the fallback address and click Apply. Manually Set a Static IP Address for the EAP 1. Select Static. 2. Set the IP address, IP mask and gateway for the static address and click Apply. 108
108
5.4.2
IP Setting
You can configure an IP address for this EAP. Two options are provided: DHCP and Static.
Get a Dynamic IP Address From the DHCP Server
1.
Configure your DHCP server.
2. Select
DHCP
on the page above.
3.
Enable the Fallback IP feature. When the device cannot get a dynamic IP address, the fallback IP
address will be used.
4.
Set IP address, IP mask and gateway for the fallback address and click
Apply
.
Manually Set a Static IP Address for the EAP
1. Select
Static
.
2.
Set the IP address, IP mask and gateway for the static address and click
Apply
.