TP-Link EAP225-Wall Omada Controller Software 3.0.5 Windows/Linux User Guide - Page 97
Log Settings, Auto Mail Feature
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
3. Choose Daily, Weekly or Monthly in the Timing Mode drop-down list and set a specific time to reboot the EAPs. 4. Click Apply. 3.8.4 Log Settings Follow the steps below to choose the way to receive system logs. 1. Go to Site Settings > Log Setting. 2. Check the box to choose the way to receive system logs (you can choose more than one) and click Apply. Two ways are available: Auto Mail Feature and Server. Auto Mail Feature If Auto Mail Feature is enabled, system logs will be sent to a specified mailbox. Check the box to enable the feature and configure the parameters. From Address To Address SMTP Server Enter the sender's E-mail address. Enter the receiver's E-mail address. Enter the IP address of the SMTP server. 91
91
3. Choose
Daily
,
Weekly
or
Monthly
in the
Timing Mode
drop-down list and set a specific time to
reboot the EAPs.
4. Click
Apply
.
3.8.4
Log Settings
Follow the steps below to choose the way to receive system logs.
1.
Go to
Site Settings > Log Setting.
2.
Check the box to choose the way to receive system logs (you can choose more than one) and
click
Apply
. Two ways are available:
Auto Mail Feature
and
Server
.
Auto Mail Feature
If Auto Mail Feature is enabled, system logs will be sent to a specified mailbox. Check the box to
enable the feature and configure the parameters.
From Address
Enter the sender's E-mail address.
To Address
Enter the receiver's E-mail address.
SMTP Server
Enter the IP address of the SMTP server.