TP-Link EAP225-Wall Omada Controller Software 3.0.5 Windows/Linux User Guide - Page 39
WPA-Enterprise, WPA-PSK, Access Control, SSID Name, Wireless Vlan ID, SSID Broadcast, Security Mode
View all TP-Link EAP225-Wall manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
SSID Name Enter an SSID name contains up to 32 characters. Wireless Vlan ID Set a VLAN ID for the wireless network. Wireless networks with the same VLAN ID are grouped to a VLAN. The value ranges from 0 to 4094. 0 means VLAN function is disabled. SSID Broadcast With the option enabled, EAPs will broadcast the SSID to the nearby hosts, so that those hosts can find the wireless network identified by this SSID. If this option is disabled, users must enter the SSID manually to connect to the EAP. Enabled by default. Security Mode Select the security mode of the wireless network. None: The hosts can access the wireless network without authentication. WEP/WPA-Enterprise/WPA-PSK: The hosts need to get authenticated before accessing the wireless network. For the network security, you are suggested to encrypt your wireless network. Settings vary in different security modes and the details are in the following introduction. SSID Isolation With the option enabled, the devices connected in the same SSID of the same AP cannot communicate with each other. Disabled by default. Access Control Rule Select an Access Control rule for this SSID. For more information, refer to Access Control. 33