TP-Link T2600G-52TS TL-SG3452 T2600G-52TS V1 Installation Guide - Page 17
Connect to Ground
View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Gigabit L2 Managed Switch 3.2 Connect to Ground Connecting the device to ground is to quickly release the lightning over-voltage and over-current of the device, which is also a necessary measure to protect the body from electric shock. In different environments, the device may be grounded differently. The following will instruct you to connect the device to the ground in two ways, connecting to the grounding bar or connecting to the ground via the power cord. Please connect the device to ground in the optimum way according to your specific operation environment. ■■ Connecting to the Grounding Bar If the device is installed in the Equipment Room, where a grounding bar is available, you are recommended to connect the device to the Grounding Bar as shown in the following figure. 100-240V~50/60Hz 0.5A Switch (Rear Panel) Ground Cable Grounding Terminal Grounding Bar Figure 3-1 Connecting to the Grounding Bar Note: The grounding bar and grounding terminal are not provided with our product. If needed, please self purchase them. ■■ Connecting to the Ground via the Power Supply If the device is installed in the normal environment, the device can be grounded via the PE (Protecting Earth) cable of the AC power supply as shown in the following figure. 100-240V~50/60Hz 0.5A Figure 3-2 Connecting to the Ground Lightning Protection 11