TP-Link T2600G-52TS TL-SG3452 T2600G-52TS V1 Installation Guide - Page 9

Gigabit L2 Managed Switch LED 10/100/ 1000Mbps (Port 1-48) Link/Act (Port 49-52) Status Green On Flashing Yellow On Flashing Off On Flashing Off Indication A 1000Mbps device is linked to the corresponding port, but no activity. A 1000Mbps device is linked to the corresponding port and data is being transmitted or received. A 10/100Mbps device is linked to the corresponding port, but no activity. A 10/100Mbps device is linked to the corresponding port and data is being transmitted or received. No device is linked to the corresponding SFP port but no activity. There is a device linked to the corresponding port. The corresponding SFP port is transmitting or receiving data. There is no device linked to the corresponding SFP port. Console (RJ-45) Port Designed to connect with the serial port of a computer or terminal for monitoring and configuring the switch. Console (USB) Port Designed to connect with the USB port of a computer for monitoring and configuring the switch. The switch has an RJ-45 console port and a micro-USB console port available. Console input is active on only one console port at a time. By default, the micro-USB connector takes precedence over the RJ-45 connector. 10/100/1000Mbps RJ45 Port Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps or 1000Mbps. Each 10/100/1000Mbps RJ45 port has a corresponding 1000Mbps LED. SFP Port Designed to install the SFP module. T2600G-52TS features 4 individual SFP ports and supports 1000M SFP module connection only. Port Feature Model T2600G-28TS T2600G-52TS 10/100/1000Mbps RJ45 Port 24 48 SFP Port 4 4 Console Port 2 2 ■■ Rear Panel Due to the similarity of T2600G-28TS and T2600G-52TS in the rear panel, here T2600G-28TS is used as an example. Introduction 03