TP-Link T2600G-52TS TL-SG3452 T2600G-52TS V1 Installation Guide - Page 26

Logon by Telnet

Get TP-Link T2600G-52TS TL-SG3452 PDF manuals and user guides View all TP-Link T2600G-52TS TL-SG3452 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Gigabit L2 Managed Switch ■■ Logon by Telnet To log on to the switch by a Telnet connection, please take the following steps: 1. Firstly CLI commands about configuring Telnet login mode and login authentication information should be configured through Console connection. For more details please refer to the CLI Reference Guide on the resource CD. Here we take login local mode as an example. 2. Make sure the switch and the PC are in the same LAN. 3. Click Start and type in cmd in the Search programs and files window and press the Enter button. Figure 5-5 Open the RUN window 4. Type telnet 192.168.0.1 in the command prompt shown as Figure 5-6, and press the Enter button. Figure 5-6 Connecting the Switch 5. Type the default user name and password (both of them are admin), then press the Enter button so as to enter User EXEC Mode. 20 Configuration Figure 5-7 Enter into the User EXEC Mode For detailed CLI configuration instructions, please refer to the CLI Reference Guide on the resource CD.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
20
Configuration
■
Logon by Telnet
To log on to the switch by a Telnet connection, please take the following steps:
1. Firstly CLI commands about configuring Telnet login mode and login authentication
information should be configured through Console connection. For more details
please refer to the CLI Reference Guide on the resource CD. Here we take login local
mode as an example.
2. Make sure the switch and the PC are in the same LAN.
3. Click Start and type in
cmd
in the Search programs and files window and press the
Enter button.
Figure 5-5
Open the RUN window
4. Type telnet
192.168.0.1
in the command prompt shown as Figure 5-6, and press
the
Enter
button.
Figure 5-6
Connecting the Switch
5. Type the default user name and password (both of them are
admin
), then press the
Enter
button so as to enter User EXEC Mode.
Figure 5-7
Enter into the User EXEC Mode
For detailed CLI configuration instructions, please refer to the CLI Reference Guide on
the resource CD.