TP-Link TD-W8960N User Guide - Page 34
ATM-EoA-Bridging, 4.4.2.4 ATM-PPPoA, Apply/Save
UPC - 845973060343
View all TP-Link TD-W8960N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
TD-W8960N Wireless N ADSL2+ Modem Router User Guide Figure 4-19 4.4.2.3 ATM-EoA-Bridging If you want to adopt the Bridge service and you need to use an ATM Interface, follow the steps below to add a WAN service over a selected ATM interface: 1. Add a new ATM interface and select EoA option for DSL Link Type (see 4.4.1.1 ATM interface). 2. Click the Add button on the screen Figure 4-7. Select WAN Service Interface over ATM PVC on the next screen (as shown Figure 4-8). 3. Select Bridging option for the WAN service type on the screen (as shown Figure 4-9), and click Next button to continue. 4. On the screen (as shown Figure 4-13) you will see the detailed settings you've made. Please click the Apply/Save button to save these settings. 4.4.2.4 ATM-PPPoA If your ISP provides a PPPoA connection and you need to use an ATM Interface, follow the steps below to add a WAN service over a selected ATM interface: 1. Add a new ATM interface and select PPPoA option for DSL Link Type (see 4.4.1.1 ATM interface). 2. Click the Add button on the screen Figure 4-7 and the next configuration is similar to PPPoE, (see section 4.4.2.1 ATM-EoA-PPPoE). The difference is that you don't need to set the PPPoE Service Name and Bridge PPPoE Frames Between WAN and Local Ports on the screen of Figure 4-10. 27