TP-Link TL-WR542G User Guide - Page 38
Enable Wireless Security, WPA-PSK/WPA2-PSK - bridge
View all TP-Link TL-WR542G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
2. Access the AP's Web-based utility and configure the AP under Bridge mode, then input 00-13-56-A8-9E-1A in corresponding Blank. ¾ Enable Wireless Security - The wireless security function can be enabled or disabled. If disabled, the wireless stations will be able to connect the router without encryption. It is recommended strongly that you choose this option to encrypt your wireless network. The encryption settings are described below. ¾ Authentication Type - You can select one of the following authentication types: • WEP - Select WEP authentication type based on 802.11 authentications. • WPA-PSK/WPA2-PSK - Select WPA/WPA2 authentication type based on pre-shared passphrase. • WPA /WPA2 - Select WPA/WPA2 authentication type based on Radius Server. ¾ Authentication Options - You can select one of the following authentication options: • When you select WEP for authentication type you can select the following authentication options: • Automatic - Select Shared Key or Open System authentication type automatically based on the wireless station request. • Shared Key - Select 802.11 Shared Key authentication. • Open System - Select 802.11 Open System authentication. • When you select WPA-PSK/WPA2-PSK for authentication type you can select Automatic, WPA -PSK or WPA2-PSK as authentication options. • When you select WPA/WPA2 as an authentication type you can select Automatic WPA or WPA2 as authentication option. ¾ WEP Key Format - You can select ASCII or Hexadecimal format. ASCII Code Format stands for any combination of keyboard characters in the specified length. Hexadecimal 31