TP-Link TL-WR642G User Guide - Page 67
Factory Defaults, 12.4 Backup and Restore, 12.5 Reboot - how to reset
UPC - 696726642008
View all TP-Link TL-WR642G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
TL-WR642G 108M Wireless Router User Guide 2) The router will reboot after the Upgrading has been finished. 4.12.3 Factory Defaults This page (shown in Figure 4-55) allows you to restore the factory default settings for the router. Figure 4-55 Restore Factory Default Click the Restore button to reset all configuration settings to their default values. • The default User Name: admin • The default Password: admin • The default IP Address: 192.168.1.1 • The default Subnet Mask: 255.255.255.0 ) Note: Any settings you have saved will be lost when the default settings are restored. 4.12.4 Backup and Restore This page (shown in Figure 4-56) allows you to save current configuration of router as backup or restore the configuration file you saved before. Figure 4-56 Backup & Restore Configuration ¾ Click the Backup button to save all configuration settings as a backup file in your local computer. ¾ To restore the router's configuration, follow these instructions: • Click the Browse button to select the backup file which you want to restore. • Click the Restore button. ) Note: The current configuration will be covered with the uploading configuration file. The restoration process lasts for 20 seconds and the router will restart automatically. Keep the router on during the restoring process, to prevent any damage. 4.12.5 Reboot This page (shown in Figure 4-57) allows you to reboot the router. 60