TRENDnet N300 User's Guide - Page 15
Getting Start - setup
View all TRENDnet N300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting Start 1. Connect an Ethernet cable directly from the LAN port on your PC to the LAN port on the TEW-640MB . Note: Connect the TEW-640MB to the configuring computer. Do not connect the TEW-640MB to your network on the initial setup. 2. Plug in the power adapter and verify the Power & Ethernet LEDs are light. 15
15
Getting Start
1.
Connect an Ethernet cable directly from the LAN port on your PC to the LAN port on the
TEW-640MB .
Note:
Connect the TEW-640MB to the configuring computer.
Do not
connect the
TEW-640MB to your network on the initial setup.
2.
Plug in the power adapter and verify the Power & Ethernet LEDs are light.