TRENDnet TEW-841APBO Users Guide - Page 46
Back Up Setting as Default, Restore to User Default
View all TRENDnet TEW-841APBO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
TRENDnet User's Guide Firmware Upgrade Current Firmware Version - Displays the current firmware applied to the device. Choose File - Click this button to browse your local computer for the firmware fie. Upload - Click this button to begin uploading the chosen firmware to the device. Flash Firmware - Verify Following uploading the firmware, you will be prompted to verify and proceed with the firmware upgrade. Click Proceed to begin the firmware upgrade procedure. TEW-841APBO Backup/Restore Settings Note: User Default replaces factory default whenever resets are applied through the GUI. To reset to factory default after User Default has been set, must select reset to FACTORY DEFAULT settings, or use the physical Reset button located on the device itself or the included PoE Injector. Factory Setting o Backup Setting - Click Export to export the CURRENT configurations as a file downloaded to your computer. o Restore New Setting - Click Choose File to browse your computer for a configuration file to apply to the device. Click Import to import the chosen configuration file. o Reset to Default - Click Reset to reset the device to Factory Default User Setting o Back Up Setting as Default - Click Backup to set the current configuration as the User Default. o Restore to User Default - Click Restore to restore the configuration to the User Defined Default. © Copyright 2019 TRENDnet. All Rights Reserved. A similar menu can be found by clicking Reset at top right of all GUI screen. 43