Thermador DWHD650WFP Installation Instructions - Page 10
through Customer Service°
View all Thermador DWHD650WFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7 Strap Alternate cable routing 2" (5 cm) Leg Adjuster Adhesive backed cord clip • Check all electrical connections to ensure they are secure and then reattach the junction box cover. • Place adhesive backed cord clip (provided in the installation kit) 5 inches from leg adjuster as shown in the figure above and route power cord through the clip. Note:The length of cord measured from the plastic back strap to the receptacle should be ≤ 47.25" (1,200 mm). • Plug the end of the supply cord into the back of the dishwasher as shown until it clicks. Note: Only use the included power cord. If cord is missing order kit SMZPC002UC through Customer Service. 10
10
7
•
Check all electrical connections to ensure they are secure
and then reattach the junction box cover°
•
Place adhesive backed cord clip (provided in the
installation kit) 5 inches from leg adjuster as shown in
the figure above and route power cord through the clip°
Note:The length of cord measured from the plastic back
strap to the receptacle should be
≤
47°25”
(1,200 mm)°
•
Plug the end of the supply cord into the back of the
dishwasher as shown until it clicks°
Note: Only use the included power cord° If cord is missing
order kit SMZPC002UC
through Customer Service°
Adhesive
backed
cord clip
Leg Adjuster
Strap
2"
(5 cm)
A
lternate cable routing