Thermador DWHD650WFP Installation Instructions - Page 16
Drain Connection
View all Thermador DWHD650WFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Drain Connection IMPORTANT NOTES about your drain connection: 20 • If local ordinance require an air gap, install it according to a the manufacturer's instructions. • If the dishwasher drain hose is to be connected to a dis- poser dishwasher drain connection, remove the plug from B the disposer's dishwasher drain connection. • The dishwasher drain hose must have one place along its length that is securely attached 33" (508 mm) above the floor. • The drain hose length can be extended if necessary. The maximum length of the drain hose, including the hose leading to the air gap, is 150" (380 cm). b B 19 • The dishwasher drain hose may be connected to the drain plumbing using an air gap in one of two ways: - Connect to the under sink dishwasher drain connection (20a). - Connect to a disposer dishwasher drain connection (20b). c d min 33" (84 cm) max 43" (110 cm) min 33" (84 cm) max 43" (110 cm) B B • You may use the piece you removed in Step 7 to attach to the inside of the adjacent cabinet and hang the drain hose from as shown (screws are not supplied) in place of using a Nonmetallic Tie as pictured in the next illustrations. Do not exceed 43" in drain hose height. • The dishwasher drain hose must be installed with a portion of it at least 33" (84 cm) off the floor; otherwise the dishwasher may not drain properly. Note: Place hose clamp (C) around end of drain hose BEFORE connecting to the plumbing. • The dishwasher drain hose may be connected to the drain plumbing using a high loop in one of two ways: - Connect to the under sink dishwasher drain connection (20c). - Connect to a disposer dishwasher drain connection (20d). 21 • Use the clamp provided (C) to attach the drain hose to the house plumbing as shown. B 16