Thermador DWHD650WFP Installation Instructions - Page 5
Tools and Materials Needed
View all Thermador DWHD650WFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Tools and Materials Needed Adjustable wrench ø1/16 in (2 mm) Drill Hole Saw Tape Measure Pliers Needle Nose Pliers Wire Cutter Wire Stripper Phillips Screwdriver Flat Screwdriver Level Elbow connection with 3/4" female hose threads on one end and fits your water supply line (copper tubing, compression fitting, or braided hose) on the other. Hot Water Supply Line - Minimum 3/8" O.D. copper tubing or metal braided dishwasher supply line. Only needed if house water supply line is not sufficient. Shut-off valve and fittings appropriate for hot water supply line (copper tubing/compression fitting, or braided hose). 5
5
Elbow connection with 3/4” female hose threads on one end and fits your water supply line
(copper tubing, compression fitting, or braided hose) on the other°
Hot Water Supply Line - Minimum 3/8” O°D° copper tubing or metal braided dishwasher supply line°
Only needed if house water supply line is not sufficient°
Shut-off valve and fittings appropriate for hot water supply line
(copper tubing/compression fitting, or braided hose)°
Tools and Materials Needed
±²³ ´ ±²µ
Wire Cutter
Needle Nose Pliers
Pliers
Wire Stripper
ø1/16 in
(2 mm)
Adjustable wrench
Tape Measure
Drill
Hole Saw
Flat Screwdriver
Level
Phillips Screwdriver