Thermador DWHD650WFP Installation Instructions - Page 7
Enclosure Requirements
View all Thermador DWHD650WFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Enclosure Requirements ! WARNING 3 Scalding or Electrical Shock Hazard! Make sure the water supply and electrical supply are shut off before installation or service. Electrical Shock/Fire Hazard! Do not allow the electrical and supply lines to touch. 1 7" (177.8 mm) min 24" (610 mm) min 34" (864 mm) 235/8" - 241/4" (600 - 616 mm) • After locating the proper place for your dishwasher, create required openings in your cabinets in order to allow for water, drain and electrical lines on the appropriate side. • The holes should be cut within the 7 x 2.5" area shown. • If the opening is made through wood, sand it smooth. • IIf the opening is made through metal, use the Edge Protector Kit SMZEP001UC, or other approved method to protect wiring from damage. Note: This dishwasher is designed to be enclosed on the top, back and both sides by standard residential kitchen cabinetry. • Select a location as close to the sink as possible for easy access to water supply and drain lines. • For proper dishwasher operation and appearance, ensure that the enclosure is square and has the dimensions shown. 2 • If the dishwasher is to be installed in a corner, ensure that there is adequate clearance to open the door as shown. 7