Thermador T36FT820NS Instructions for Use - Page 14
Basic Operation, Additional functions
View all Thermador T36FT820NS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
en-us Basic Operation The ethylene absorber slows down the ripening of ethylene-sensitive fruit and vegetables to keep them fresher for longer. Attaching the ethylene absorber ▶ Attach the ethylene absorber in accordance with the in- structions for installation and use for the ethylene absorber. Using the refill set 1. Install the components of the refill set in accordance with the instructions for installation and use for the ethylene absorber. 2. Replace the bags and the timer every 6 months following activation. Note: Refill sets consisting of bags and timer are available from our customer service, your dealer or on our website. Ice scoop You can use the ice scoop to remove a portion of ice cubes. Basic Operation 7 Basic Operation Basic Operation 7.1 Switching on the appliance 1. Connect the appliance to the electricity supply. → Page 8 Note: If the appliance has been previously switched off using the control panel, press . a The appliance begins to cool. 2. Switch off the warning signal with . a goes out as soon as the set temperature has been reached. 3. Set the required temperature. → Page 14 7.2 Operating tips ¡ Once you have switched on the appliance, the set temperature is only reached after several hours. Do not put any food in the appliance until the temperature has been reached. ¡ The front and side panels of the housing heat up occasionally. This prevents condensation from forming. ¡ When you close the door, a vacuum may be created. The door is then difficult to open again. Wait a moment until the vacuum is offset. 7.3 Switching off the appliance ▶ Press . 7.4 Setting the temperature unit You can choose between the temperature setting °F and °C. 1. Press . 2. Press . 3. Press / (Submenu setting) until the setting display submenu shows or . 4. Press . 14 7.5 Setting the temperature Setting the refrigerator compartment temperature ▶ Press / (Refrigerator compartment) repeat- edly until the temperature display (refrigerator compart- ment) shows the required temperature. The recommended temperature in the refrigerator compartment is 37 °F (3 °C). Setting the freezer compartment temperature ▶ Press / (Freezer compartment) repeatedly until the temperature display (freezer compartment) shows the required temperature. The recommended temperature in the freezer compartment is 0 °F (−18 °C). 7.6 Cool-fresh compartment storage setting You can set the temperature and humidity of the coolfresh container using predefined storage settings. Tip: Further settings are available in the Home Connect™ app. Setting the cool-fresh compartment storage setting 1. Press any touch field on the control panel (cool-fresh compartment). 2. Press and hold fully. until the light bar lights up 3. Press the storage setting that you require. Additional functions 8 Additional functions Additional functions 8.1 Super cooling With Super cooling, the refrigerator compartment cools so that it as cold as possible. Switch on Super cooling before placing large quantities of food in the freezer compartment. Note: When Super cooling is switched on, increased noise may occur. Switching on Super cooling ▶ Press . a lights up. Note: After approximately 6 hours, the appliance switches to normal operation. Switching off Super cooling ▶ Press . a The previously set temperature is displayed. 8.2 Super freezing With Super freezing, the freezer compartment cools so that it as cold as possible. Switch on Super freezing 1 to 2 hours before placing food weighing 4.4 lbs (2 kg) or more into the freezer compartment. Use Super freezing to accelerate ice cube production.