Thermador T36FT820NS Instructions for Use - Page 28

Customer service,

Page 28 highlights

en-us Eliminating faults Fault Cause and troubleshooting Water is dripping from the water dispenser. Air is in the water system. ▶ Keep dispensing water until it contains no more air. The water dispenser is not functioning. There is no water supply. ▶ Ensure that there is a water supply and that the shut-off valve on the water con- nection is open. Contact an installer if necessary. Kink in the water hose. ▶ Turn off the water supply and straighten the kink in water hose. If necessary, replace the water hose. Ice cube production is low. The appliance has only recently been connected. ▶ Wait approximately 4 hours until the first batch of ice cubes is ready. The freezer compartment has been opened frequently or for an extended period of time. ▶ Check ice cube production after a few hours. Low water pressure. ▶ Check the water pressure of the water supply system or the external water filter system. Connect the appliance only to a water connection with sufficient water pressure. The water filter is blocked. ▶ Change the water filter. → Page 20 Food or objects are blocking the fill level sensor for the ice cube maker. ▶ Remove all food or objects from the ice storage container. The ice cube maker is not function- Ice cube production is switched off. ing. ▶ Switch on ice cube production. → Page 21 There is no water supply. ▶ Ensure that there is a water supply and that the shut-off valve on the water con- nection is open. Contact an installer if necessary. Kink in the water hose. ▶ Turn off the water supply and straighten the kink in water hose. If necessary, replace the water hose. The ice cube maker has no current. ▶ Call customer service. → "Customer service", Page 29 The appliance hums, bubbles, Not an issue. A motor is running, e.g. refrigerating unit, fan. Refrigerant is flowing buzzes, gargles, clicks, crackles or through the pipes. The motor, switches, solenoid valves or water valves are switch- rumbles. ing on or off. Automatic defrosting is running. No action required. The appliance makes noises. The appliance is not level. ▶ Align the appliance using a bubble level and the screw feet. The appliance is not free-standing. ▶ Observe the minimum clearances for the appliance. Fittings wobble or stick. ▶ Check the removable fittings and, if required, replace these. Bottles or containers are touching. ▶ Move the bottles or containers away from each other. Super freezing is switched on. No action required. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

en-us
Eliminating faults
28
Fault
Cause and troubleshooting
Water is dripping from the water
dispenser.
Air is in the water system.
Keep dispensing water until it contains no more air.
The water dispenser is not func-
tioning.
There is no water supply.
Ensure that there is a water supply and that the shut-off valve on the water con-
nection is open.
Contact an installer if necessary.
Kink in the water hose.
Turn off the water supply and straighten the kink in water hose.
If necessary, replace the water hose.
Ice cube production is low.
The appliance has only recently been connected.
Wait approximately 4 hours until the first batch of ice cubes is ready.
The freezer compartment has been opened frequently or for an extended period of
time.
Check ice cube production after a few hours.
Low water pressure.
Check the water pressure of the water supply system or the external water filter
system.
Connect the appliance only to a water connection with sufficient water pressure.
The water filter is blocked.
Change the water filter.
Page 20
Food or objects are blocking the fill level sensor for the ice cube maker.
Remove all food or objects from the ice storage container.
The ice cube maker is not function-
ing.
Ice cube production is switched off.
Switch on ice cube production.
Page 21
There is no water supply.
Ensure that there is a water supply and that the shut-off valve on the water con-
nection is open.
Contact an installer if necessary.
Kink in the water hose.
Turn off the water supply and straighten the kink in water hose.
If necessary, replace the water hose.
The ice cube maker has no current.
Call customer service.
"Customer service", Page 29
The appliance hums, bubbles,
buzzes, gargles, clicks, crackles or
rumbles.
Not an issue. A motor is running, e.g. refrigerating unit, fan. Refrigerant is flowing
through the pipes. The motor, switches, solenoid valves or water valves are switch-
ing on or off. Automatic defrosting is running.
No action required.
The appliance makes noises.
The appliance is not level.
Align the appliance using a bubble level and the screw feet.
The appliance is not free-standing.
Observe the minimum clearances for the appliance.
Fittings wobble or stick.
Check the removable fittings and, if required, replace these.
Bottles or containers are touching.
Move the bottles or containers away from each other.
Super freezing is switched on.
No action required.