Toshiba 32HLC56 Owners Manual - Page 38

Chapter 6: Using the Monitor's features PC/HDMI Audio The PC and HDMI inputs share the same set of analog audio inputs. If you have both a PC and an HDMI/DVI device connected to the monitor (and the HDMI/DVI device requires analog audio output), use the PC/HDMI Audio setting to specify which audio (PC or HDMI/DVI) will be output from the monitor's speakers (- pages 14-15). To set the PC/HDMI Audio: 1 Press Y and open the Set Up menu. 2 Highlight AV Connection and press T. 3 Press B or b to select PC/HDMI Audio, and then press C or c to select PC or HDMI. AV Connection PC/HDMI Audio HDMI Audio PC Digital MENU Back EXIT Watch TV PC: Mutes the sound from the HDMI device, and outputs the sound of the PC. HDMI: Mutes the sound from your PC, and outputs the sound of the HDMI device. Note: • The PC/HDMI Audio setting influences the HDMI Audio setting. If the PC/HDMI Audio setting is set to HDMI, the HDMI Audio setting changes to Auto. If the PC/HDMI Audio setting is set to PC, the HDMI Audio setting changes to Digital and will be grayed out. • The PC IN and HDMI IN terminals share the audio inputs labeled PC/HDMI (AUDIO) on the monitor's back panel. Setting the sleep timer You can set the sleep timer to turn off the monitor after a set length of time (maximum of 12h50m). To set the sleep timer: Press [ on the remote control to set the length of time until the monitor turns off. Repeatedly press [ to increase the time in 10-minute increments, up to 12h50m (12 hours and 50 minutes). Timer 00h00m To cancel the sleep timer: Press [ until it is set to 00h00m. To set the sleep timer using the on-screen menus: 1 Press Y and open the Timer menu. 2 Press B or b to highlight Sleep Timer. Sleep Timer On Timer Timer 02:00 00:00 MENU Back EXIT Watch TV 3 Press the Number buttons (0-9) or C or c to enter the length of time until the monitor turns off automatically. 4 Press O to start the timer. Note: • When a power failure occurs, the sleep timer setting may be cleared. • To display the amount of time remaining on the sleep timer, press E. 38