Toshiba 32HLC56 Owners Manual - Page 7
Introduction - resolution
UPC - 022265240670
View all Toshiba 32HLC56 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Chapter 1: Introduction Features of your new monitor The following are just a few of the many exciting features of your new Toshiba widescreen LCD monitor: • Two sets of ColorStream® HD high-resolution component video inputs (- pages 9 and 12). • HDMI™ digital, high-definition multimedia interface (- pages 9 and 14). • SRS WOW™ audio technologies (- page 33). • CableClear® DNR digital picture noise reduction (- page 31). • PC IN (Analog RGB) computer input (- pages 9 and 15). Overview of steps for installing, setting up, and using your new monitor Follow these steps to set up your monitor and begin using its many exciting features. 1 Carefully read the important safety, installation, care, and service information (- pages 2-4). Keep this manual for future reference. 2 Observe the following when choosing a location for the monitor: • Place the monitor on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the monitor to a wall, pillar, or other immovable structure (- page 3). • Place the monitor in a location where light does not reflect on the screen. • Place the monitor far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the monitor. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY. 3 Do not plug in any power cords until AFTER you have connected all cables and devices to your monitor. 4 BEFORE connecting cables or devices to the monitor, learn the functions of the monitor's connections and controls (- pages 8-9). 5 Connect your other electronic device(s) to the monitor (- pages 10-15). 6 Install the batteries in the remote control (- page 16). 7 See "Learning about the remote control" (- page 17) for an overview of the buttons on the remote control. 8 Program the remote control to operate your other device(s) (- pages 18-22). 9 AFTER connecting all cables and devices, plug in the power cords for your monitor and other devices. Press POWER on the monitor control panel or remote control to turn on the monitor. 10 See "Menu layout and navigation" for a quick overview of the monitor's menu system (- page 23). 11 For details on using the monitor's features, see Chapter 6. 12 For help, refer to the Troubleshooting section (- Chapter 7). 13 For technical specifications and warranty information, see Chapter 8. 14 Enjoy your new monitor! 7