Toshiba 32SL410U User Manual

Toshiba 32SL410U Manual

Toshiba 32SL410U manual content summary:

  • Toshiba 32SL410U | User Manual - Page 1
    Owner's Manual Integrated High Definition LCD Television 19SL410U 24SL410U 32SL410U For an overview of steps for setting up your new TV, see page 10. Note: To display a High Definition picture, the TV must be receiving a High Definition signal (such as an over-the-air High Definition TV broadcast,
  • Toshiba 32SL410U | User Manual - Page 2
    and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See item 25 on page 4. WARNING: If you decide to wall mount this television
  • Toshiba 32SL410U | User Manual - Page 3
    can be easily unplugged in case the product requires service. 21) NEVER route the product's power cord inside a wall or similar enclosed area. 22) Never modify this equipment. Changes or modifications may void: a) the warranty, and b) the user's authority to operate this equipment under the rules of
  • Toshiba 32SL410U | User Manual - Page 4
    Always place the back of the television at least four (4) inches away from any vertical surface (such as a wall) to allow proper ventilation. 29) Never allow anything to rest on or roll over the power cord, and never place the TV where the power cord is subject to wear or abuse. 30) Never overload
  • Toshiba 32SL410U | User Manual - Page 5
    replacement parts specified by the manufacturer. • Upon completion of service, ask the service technician to perform routine safety checks to determine that the TV is in safe operating condition. Choosing a location for your LCD TV To Display your LCD TV on the included Pedestal Stand: Observe
  • Toshiba 32SL410U | User Manual - Page 6
    Hook Sturdy strap (as short as possible) 32" TV VESA Mounting Pattern Four screws 6 Hook Sturdy strap (as short as possible) FCC Declaration of Conformity Compliance Statement (Part 15): The Toshiba 19SL410U, 24SL410U, and 32SL410U Televisions comply with Part 15 of the FCC rules. Operation is
  • Toshiba 32SL410U | User Manual - Page 7
    set by the U.S. Environmental Protection Agency. ENERGY STAR and the ENERGY STAR mark are registered U.S. marks. Important notes about your LCD TV The following symptoms are technical limitations of LCD countries. • MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. 7
  • Toshiba 32SL410U | User Manual - Page 8
    Contents Important Safety Instructions 3 Installation, Care, and Service 3 Chapter 1: Introduction 9 Features of your new TV 9 Overview of steps for installing, setting up, and using your new TV 10 TV front and side panel controls and connections ........ 11 TV back panel connections 12
  • Toshiba 32SL410U | User Manual - Page 9
    HD, LCD TV: • Integrated digital tuning (8VSB ATSC and QAM) eliminates the need for a separate digital converter set-top box (in most cases). • 1366 x 768 (19SL410U and 32SL410U)/1920 x 1080 (24SL410U) output resolution. • Two HDMI® digital, high-definition multimedia interfaces 1080p input support
  • Toshiba 32SL410U | User Manual - Page 10
    . Keep this manual for future reference. 2 Observe the following when choosing a location for the TV: • Read "Important notes about your LCD TV" ( page 7). • Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or
  • Toshiba 32SL410U | User Manual - Page 11
    panel controls and connections Model 19SL410U is used in this manual for illustration purposes. Left side panel TV front TV top Touch sensor 1 Green LED Power LED (Green) = Power indicator 2 Remote sensor Point the remote control toward this remote sensor ( "Remote control effective range" on
  • Toshiba 32SL410U | User Manual - Page 12
    19. TV back Power Cord 1 code modulation) format for connecting an external Dolby Digital decoder, amplifier, A/V receiver, or home theater system with optical audio input. 3 ANT/CABLE Antenna input that supports as a Toshiba DVD player The VIDEO IN and ColorStream® HD inputs share the same audio
  • Toshiba 32SL410U | User Manual - Page 13
    18). Analog RGB (15-pin) computer cable Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT/CABLE input on your TV. Standard A/V cables (red/white/yellow) Standard A/V cables (composite video) usually come in sets of three, and are
  • Toshiba 32SL410U | User Manual - Page 14
    output is set to). Use the Cable box controls to change channels. 14 To view the VCR: Turn ON the VCR. Select the Video video input source on the TV.* To view the camcorder video: Select the Video video input source on the TV.* * To select the video input source, press remote control ( page
  • Toshiba 32SL410U | User Manual - Page 15
    satellite receiver to the ColorStream HD terminals (Y, PB, and PR) on the TV. The ColorStream HD terminals can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance (1080p is not supported). - If your DVD player or
  • Toshiba 32SL410U | User Manual - Page 16
    devices (such as a set-top box or DVD player 720p (60Hz), 1080i (60Hz) and 1080p (24Hz/60Hz) signal formats. For detailed signal specifications, see page 56. Supported Audio format: Linear PCM, sampling rate 32 source on the TV.* * To select the video input source, press remote control ( page 21
  • Toshiba 32SL410U | User Manual - Page 17
    TV's remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see page 48. TV to models incorporating Toshiba's REGZA-LINK. However, Toshiba is not liable for those operations. Refer to the individual instruction manuals for
  • Toshiba 32SL410U | User Manual - Page 18
    audio system TV back panel Optical audio cable To control the audio: 1 Turn on the TV and the digital audio device. 2 Press on the TV's remote control • One stereo RCA to RCA audio cable TV back panel Sound Digital Audio Selector Audio Settings Audio Setup Stereo audio system 4 In the Optical
  • Toshiba 32SL410U | User Manual - Page 19
    to the RGB/PC IN terminal on the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. TV back panel Analog RGB computer cable PC audio cable PC audio output Computer Conversion adapter (if necessary) • To use a PC, set the monitor output resolution on the PC before connecting it to
  • Toshiba 32SL410U | User Manual - Page 20
    are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. Adjusting the viewing angle For the 19SL410U and 24SL410U models, you can adjust the tilt angle of the LCD screen for better viewing comfort
  • Toshiba 32SL410U | User Manual - Page 21
    POWER turns the TV on and off. When the TV is on, the green LED indicator on the TV front will be illuminated. 2 PIC SIZE cycles through the picture sizes: Normal, TheaterWide 1/2/3, Full, 4:3, Native (Also see "Arrow buttons.") 20 MENU accesses the main TV menu system ( pages 22-23). 21 STOP Stops
  • Toshiba 32SL410U | User Manual - Page 22
    Energy Saving Settings menu] J Off / On J [Opens the Edit Rating Limits menu] J Off / Video / Video+ J Off / On J Off / 30 mins / 60 mins / 90 mins / 120 mins J [Opens the New PIN Code entry screen] J [Opens the Installation menu ( page 23)] J Enable REGZA-LINK / TV Auto Input Switch / TV Auto Power
  • Toshiba 32SL410U | User Manual - Page 23
    Off • When a menu is open, use the up/down/left/right arrow buttons (STWX) on the remote control or TV control panel to move in the corresponding direction in the menu. • Press to save your menu settings or select a highlighted item. (A highlighted menu item appears in a different color in the menu
  • Toshiba 32SL410U | User Manual - Page 24
    Antenna Cancel Done 5 To save your new settings, highlight Done and press . To revert to your original settings, highlight Cancel and press . Programming channels into the TV's channel memory When you press or on the remote control or TV control panel, your TV will stop only on the channels you
  • Toshiba 32SL410U | User Manual - Page 25
    Setting up your TV Programming channels automatically Your TV can automatically detect all active channels in your area and store them in its memory. After the channels are programmed automatically, you can manually process again unless your Cable TV service lineup changes significantly. To program
  • Toshiba 32SL410U | User Manual - Page 26
    Chapter 5: Setting up your TV Setting channel skip To prevent certain channels from being viewed, and then press to remove the symbol. To manually add digital subchannels on a physical channel: Use the Channel Numbers and the Dash ( ) on the remote control to enter the channel number (for example
  • Toshiba 32SL410U | User Manual - Page 27
    Chapter 5: Setting up your TV To create and assign a custom label: 1 Open the Channel Labeling 9 WX Y Z w x y z 9 INPUT Space 3 Repeatedly press the corresponding key on the remote control to highlight the desired character on the on-screen software keyboard. 4 The highlighted character is entered
  • Toshiba 32SL410U | User Manual - Page 28
    the Factory Defaults or Support Information and view the PIN code has been set, enter your PIN code. Press W or X to select Done and press .) A warning message will appear, select Yes and press , the TV will turn off automatically after a few seconds. After the TV turns off, unplug the TV power
  • Toshiba 32SL410U | User Manual - Page 29
    remote control or TV control panel to change the input. The current signal source displays in the top right corner of the Input Selection screen. Input Selection 0 ANT/CABLE 1 Video 2 ColorStream HD Base CC Mode Digital CC Settings Input Labeling Channel Labeling Menu Language Channel Browser Setup
  • Toshiba 32SL410U | User Manual - Page 30
    TV's features 3 Press S or T to highlight the video source you want to label. Input Labeling Video ColorStream HD over when you press on the remote control. 5 To save the new Keep a history of the last 32 channels or inputs viewed. • Browser allows you to quickly set up a favorite channels/
  • Toshiba 32SL410U | User Manual - Page 31
    press W or X to select the setting you prefer: either On, or Off. Note: History List will be cleared every time the TV is powered off. 4 Press T to highlight ANT Browser™: • Press or on the remote control. • Press to surf backward through the previously tuned 32 channels in the History List, the
  • Toshiba 32SL410U | User Manual - Page 32
    tuned normally Digital channels will have priority when manually entering a channel number using the Channel Number (0-9) on the remote control, analog channels can still be tuned by / , if available Digital Only digital channels can be tuned To set the Channel Tuning Mode: 1 From the Setup menu
  • Toshiba 32SL410U | User Manual - Page 33
    the picture size that displays the current program the way that looks best to you. You can save separate picture size preferences for each input on your TV. To select the picture size using the remote control: 1 Press on the remote control. 2 While the Picture Size screen is open, you can do
  • Toshiba 32SL410U | User Manual - Page 34
    signal program, Native mode scales the video to display the entire picture within the borders of the screen (i.e. no overscanning). • This is especially useful for external HD sources such as DVHS movies, or PC graphics. Note: • This mode is supported only for HDMI (1080p,1080i, 720p, 480p, and
  • Toshiba 32SL410U | User Manual - Page 35
    feature When the auto aspect ratio feature is set to On, the TV will automatically select the picture size when one of the following input sources is received: • A 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE input • A 480i signal from the Video or ColorStream HD input • A 480i, 480p
  • Toshiba 32SL410U | User Manual - Page 36
    15 minutes, the FREEZE mode will automatically be released and the TV will return to moving picture. Using the FREEZE function for any and dynamic picture (factory setting) Standard picture settings (factory setting) Lower contrast for darkened room (factory setting) Designed for viewing of
  • Toshiba 32SL410U | User Manual - Page 37
    narration, and sound effects of TV programs and videos that are closed captioned (usually marked "CC" in program guides). • Text- An on-screen available in your area, a black rectangle may appear on screen. If this happens, set the Base CC Mode to Off. • To turn off the closed caption mode: Select
  • Toshiba 32SL410U | User Manual - Page 38
    X to select the desired service. 4 Press . Adjusting the audio Muting the sound Press on the remote control to partially reduce Settings Audio Setup 3 Press S or T to select Audio, and then press W or X to select the desired service. 4 Press . Selecting stereo/SAP broadcasts The multi-channel TV
  • Toshiba 32SL410U | User Manual - Page 39
    Enable Rating Blocking, Edit Rating Limits, Input Lock, Control Panel Lock, Game Timer, and New PIN Code features. You can use these features after entering the correct PIN code. Entering the PIN code 1 Press and highlight the Locks menu icon. Locks Enable Rating Blocking Off Edit Rating Limits
  • Toshiba 32SL410U | User Manual - Page 40
    Press the Number buttons to enter a new four digit code. Reenter the PIN code to confirm it. 6 Press . The new PIN code is now active. Note: PIN code can not be set to "0000". Blocking TV programs and movies by rating (V-Chip) Some TV programs and movies include signals that classify the content of
  • Toshiba 32SL410U | User Manual - Page 41
    highlight the Locks menu icon. 2 Press T to display the PIN code entering screen. 3 Enter your four-digit PIN code and press . 4 Press T to highlight Enable Rating Blocking. is not determined, transmitted, or controlled by the TV or Toshiba. • The additional rating system is an evolving technology
  • Toshiba 32SL410U | User Manual - Page 42
    watching, press on the remote control. If it is PIN code has not been set yet, a warning message will appear. 5 A symbol will appear in the box. To remove the symbol, press again. Unlocking programs temporarily If you try to tune the TV to a program that exceeds the rating limits you set, the TV
  • Toshiba 32SL410U | User Manual - Page 43
    your settings from being changed accidentally (by children, for example). When the control panel lock is On, none of the controls on the TV control panel will operate except POWER. To lock the control panel: 1 Press and highlight the Locks menu icon. 2 Press T to display the PIN code entering
  • Toshiba 32SL410U | User Manual - Page 44
    on a USB storage device. Photo Viewer specifications: • Data type: JPEG Exif ver2.1 • File format: JPEG • Maximum photo size: 6 MB • Maximum number of files: 500 / folder • Maximum photo resolution: 4096 x 4096 pixels • Best photo resolution: 1366 x 768 pixels (for 19SL410U and 32SL410U/1920 x 1080
  • Toshiba 32SL410U | User Manual - Page 45
    into the port and do not remove while viewing Media Player. • USB device: USB Mass Storage Class device (MSC) • Connectivity is not guaranteed for all devices. • Connect the USB device to the TV directly. • Do not use a USB Hub. • You must obtain any required permission from copyright owners to use
  • Toshiba 32SL410U | User Manual - Page 46
    TV's features Single View In this view mode, only files located in the selected directory shall be displayed. This view allows you to change the photo content manually , you can adjust the Sound menu functions from the Quick Menu. To set the repeat mode: 1 Press to open the Quick Menu. 2 Press
  • Toshiba 32SL410U | User Manual - Page 47
    turn itself off (standby) after 4 hours, if you do not operate the TV either from the remote control or the TV control panel. 1 From the Preferences menu, highlight Energy Saving Settings and press . 2 Press S or T to select Automatic Power Down. 3 Press W or X to select On or Off, and press . Note
  • Toshiba 32SL410U | User Manual - Page 48
    , you should unplug the power cord. Using REGZA-LINK® This is a new feature that uses CEC technology and allows you to control Toshiba REGZA-LINK compatible devices from the TV remote via HDMI connection ( page 17). When the Enable REGZA-LINK in the REGZALINK setup menu is set to On, the following
  • Toshiba 32SL410U | User Manual - Page 49
    in the REGZA-LINK Setup menu are set to On, the following functions will be enabled. Item Description If a connected HDMI device starts TV Auto Input playing video or audio, the TV will Switch automatically switch to the appropriate HDMI input. TV Auto Power If a REGZA-LINK device is turned
  • Toshiba 32SL410U | User Manual - Page 50
    or PCM) • Video resolution • Aspect ratio of incoming video signal (4:3 or 16:9) • V-Chip rating status • Game Timer (if set) Sor T while the RECALL or INFO display is onscreen. Understanding the last mode memory feature If power is lost while you are viewing the TV, the Last Mode Memory
  • Toshiba 32SL410U | User Manual - Page 51
    7: Using the TV's advanced features Using the advanced picture settings features Using Dynamic Contrast Dynamic Contrast detects changes in picture quality that affect the appearance of your contrast settings and then automatically adjusts the video. To select Dynamic Contrast preference: 1 From
  • Toshiba 32SL410U | User Manual - Page 52
    setting. Note: • If the current input is ANT/CABLE, Video, the menu will display the text "CableClear." The available selections are Off, Low, Middle, and High. • If the current input is ColorStream HD the new settings, highlight HD, TV off and then on again. Note: You can change the
  • Toshiba 32SL410U | User Manual - Page 53
    or T4). Set the closed caption feature to Off ( page 37). TV stops responding to controls • If the TV stops responding to the remote control or TV control panel and you cannot turn off the TV, please unplug the power cord for a few seconds then plug it back in and try again. Other problems If your
  • Toshiba 32SL410U | User Manual - Page 54
    you have changed settings of the device, turn off your TV and unplug the power cord, then plug and turn on again. • If several devices are connected, REGZA-LINK feature may not operate properly. • Read the instruction manual furnished with the connected REGZA-LINK device. HDMI problems For HDMI
  • Toshiba 32SL410U | User Manual - Page 55
    Current 19SL410U: 0.7 A 24SL410U: 0.9 A 32SL410U: 0.9 A Power Consumption 19SL410U: 1 W in standby mode 24SL410U: 1 W in standby mode 32SL410U: 1 W in standby mode Audio Power 19SL410U: 3 W + 3 W 24SL410U: 3 W + 3 W 32SL410U: 5 W + 5 W Speaker Type 19SL410U: Two 1-1/16 x 3-1/2 inches (27.4 x 88.2 mm
  • Toshiba 32SL410U | User Manual - Page 56
    blur, or judder. But this is not a malfunction of your TV. Format Resolution V. Frequency H. Frequency Pixel Clock Frequency VGA SVGA XGA WXGA SXGA HDMI signal formats Format VGA SVGA XGA WXGA SXGA 480i 480p 720p 1080i 1080p 1080p Resolution 640 x 480 800 x 600 1080 x 1024 1024 x 768 1280
  • Toshiba 32SL410U | User Manual - Page 57
    . How to Obtain Warranty Service After following all of the operating instructions in the Owner's manual, review the section entitled "Concierge" located on our Customer Support Web site at http://support.toshiba.com. If you find that service is needed, follow the instructions provided on the web
  • Toshiba 32SL410U | User Manual - Page 58
    mounted in such a manner as to impede normal service is not covered under these warranties. This includes wall mounts, specifications, User manuals or guides as to usage and/or storage. j. Firmware updates that are posted to the Toshiba Support website and can be performed by the end user via a USB
  • Toshiba 32SL410U | User Manual - Page 59
    , ETC.). YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND/OR MANUALS. IF YOU FAIL TO DO SO, THIS TELEVISION MAY NOT FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE. THIS WARRANTY WILL NOT COVER ANY SERVICE THAT IS REQUIRED, IN PART OR IN WHOLE, AS A RESULT OF
  • Toshiba 32SL410U | User Manual - Page 60
    all of the operating instructions in this manual, checked the "Troubleshooting" section, and have visited www.toshiba.ca/support for additional information, you find that service is needed, please contact TCL Customer Support toll free at 1 800 2683404. A copy of the GPL source code in this product
  • Toshiba 32SL410U | User Manual - Page 61
    Note
  • Toshiba 32SL410U | User Manual - Page 62
    INFORMATION SYSTEMS, INC. Corporate Headquaters: 9740 IRVINE BLVD.; IRVINE, CA 92618 U.S.A. Visual Products Service and Support Dept: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. TOSHIBA OF CANADA LTD. HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA CableClear, ColorStream
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

Integrated High Definition
LCD Television
19SL410U
24SL410U
32SL410U
For an overview of steps for setting up your new TV, see page 10.
Note: To display a High Definition picture, the TV must be receiving
a High Definition signal (such as an over-the-air High Definition TV
broadcast, a High Definition digital cable program, or a High
Definition digital satellite program). For details, please contact your
TV antenna installer, cable provider, or satellite provider.
2010 TOSHIBA CORPORATION
All Rights Reserved
Owner’s Record
The model number and serial number are on the back of
your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
49.18S01.001
Owner’s Manual