Toshiba HD-D1 Firmware Upgrade - Page 22

Introduction Connections 2 Chapter Connections Connecting to a device with an HDMI input Playback (Basic) Playback (Advanced) Internet connection Others HDMI stands for High Definition Multimedia Interface. HDMI transfers digital audio and uncompressed digital video on a single cable. As a result, audio cables and video cables don't need to be connected separately to a device. The HDMI OUTPUT jack is designed to HDMI Version 1.1. To view 480 , 720 , 1080 pictures, use the HDMI OUTPUT jack or the COMPONENT OUTPUT jacks to connect to a TV ( page 22, "Connecting to a TV with component video inputs"). Some discs may require use of the HDMI OUTPUT for viewing of high resolution material. See note regarding copy protection. Note on copy protection and high definition viewing HD DVD and DVD video disc creators have the option to include copy protection instructions in their discs that prohibit the output of some standard video or high definition video (original 720p or 1080i or up-converted 480i or 480p) from the COMPONENT OUTPUT jacks. If such instructions are present in the disc you are playing, you must use the HDMI OUTPUT jack to view the disc in a high definition format and the COMPONENT OUTPUT jacks, if activated, will output video only in 480i or 480p resolution. HDMI compatible device Depending on the equipment connected to this player, such as a TV or a projector, no sound may be output by the display. In this case, set "Digital out HDMI" ( page 53) to "PCM". If sound still is not heard, use analog output. HDMI input HDMI cable (supplied) • Set "Digital out HDMI" (


page 53). Switching output signals (Switching to HDMI output and setting the resolution) Turn on the player ( page 28) before you configure the following setting. 1 Press (remote control). Player display window Make sure the HDMI indicator ILLUMINATES. HDMI When the HDMI indicator illuminates. signals are being input from the HDMI OUTPUT jack. When HDMI output is selected, video cannot be displayed from the COMPONENT OUTPUT jacks, S-VIDEO jack, and VIDEO jack (yellow). 2 Press repeatedly (remote control). Set the resolution to output from the player in accordance with the scanning method of the connected TV. Pressing the button switches between 480 , 720 , and 1080 . The setting is indicated on the player display window. Notes Refer to the owner's manual for the TV to be connected to this player for more information concerning HDMI connections. When the HDMI connection is not verified, the error message appears on the front panel display. In this case, disconnect the HDMI cable then connect it again, or turn off the connected HDMI device then turn it on. HDMI output is digital only, DVI analog is not supported. HDMI is an evolving technology, so it is possible that some devices may not operate properly with this player. Be sure to use an HDMI cable with the HDMI logo ( ) to connect an HDMI device. If your display does not support multi-channel audio, to use multi-channel audio you will need to either use an AV receiver that supports multi-channel audio over HDMI (set "Digital out HDMI" to "Auto" or to match the decoding capability of your equipment) or use a receiver that has a coaxial or optical SPDIF digital audio input (set "Digital audio SPDIF" to match the decoding capability of your equipment). HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Downloaded from www.Manualslib.com manuals search engine 21