Toshiba RD-XS35SU Owners Manual - Page 195
Connecting to a TV equipped with component video inputs
View all Toshiba RD-XS35SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
Connections Connecting to a TV equipped with component video inputs If your TV has component video inputs, you can obtain pictures in better quality. To PB VIDEO OUT To Y VIDEO OUT To PR VIDEO OUT Only video signals are output from the COMPONENT OUTPUT jacks. (Audio signals are not output.) To obtain the sound, connect an audio system to the audio output terminals. TV or monitor equipped with component video (INTERLACED/ PROGRESSIVE) inputs Video cable (not supplied) To PR video input To PB video input To Y video input Component video outputs/inputs Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback. Actual labels for component video inputs may vary depending on the TV manufacturer. (ex.Y, R-Y, R-B or Y, CB, CR) In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance. • Make the following setting. On-screen display Select "Audio out select" "Analog 2ch" Page page 39 To switch the output signal (Progressive/Interlaced) PROGRESSIVE Press PROGRESSIVE button to change the video output signals (progressive and interlace) from COMPONENT OUTPUT jacks. Notes • Refer to the owner's manual for the TV to be connected to this recorder for more information concerning an audio system. • If you place the recorder near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the recorder away from the tuner and radio. • The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier's volume to a moderate listening level. Otherwise, the speakers and your hearing may be damaged by sudden high volume sound. • Turn off the amplifier before you connect or disconnect the recorder's power cord. If you leave the amplifier power on, the speakers may be damaged. • Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the "Standard Definition" output. If there are questions regarding our TV set compatibility with this model 525p DVD player, please contact our Customer Service Center. 26 RD-XS35SU/SC_Inst_E_p19-28 26 06.2.13, 4:33 PM