Toshiba RD-XS35SU Owners Manual - Page 67

Resuming playback from the location last stopped at (Resume Play) DVD-RW DVD-R DVD-VIDEO VCD CD You can resume playback from the location where you stopped at. If you press PLAY button after stopping playback, the playback resumes from the location you have stopped. If you stop playback by pressing STOP button twice, the resume playback feature will be cancelled. Notes • Resume feature cannot function when: - you select a disc menu language ( page 146) or change the parental lock setting ( page 147). - you play a PBC-featured VIDEO CD. - you open the disc tray. • There may be a difference in the location where playback resumes depending on the disc. • While the recorder retains a location in memory, initial setting changes may function only after the memory is cleared. Selecting the sound If a disc contains several languages, you can select a preferred language from them to hear. 1) During playback, press AUDIO. Each time you press the button, output sound changes. Selecting Subtitles You can display subtitles on the TV screen and select a subtitle language from those included on the disc. 1) Press SUBTITLE during playback. The current subtitle setting appears. e.g. Subtitle 1 - - Status Off Setting number and language The language code appears instead of the language name. Refer to the list of languages and their abbreviations. ( page 165) 2) Press to select "Status," then press ADJUST to select "On." Skip to step 3 if "On" is already displayed. 3) Press to select "Subtitle," then press ADJUST to select a language. The subtitles of recorded languages appear. • To turn the subtitles on or off At step 2, select "Off" by pressing ADJUST button. Notes • Some DVD video discs are set to display subtitles automatically. • Depending on the scene, subtitles may not appear immediately after you set the subtitle function to on. • Some DVD video discs will allow you to change subtitle languages and turn subtitles on or off only via the disc menu. Selecting the camera angle If the scene was recorded with multiple angles, you can easily change the camera angle of the scene you are watching. 1) Press ANGLE while playing a scene recorded with multiple angles. While playing a scene recorded with multiple angles, the angle icon appears on the TV screen and on the front panel. Press ANGLE button while the angle icon is displayed. e.g. Angle 1 / 6 Total number of angles Current selection Angle icon 2) Press ADJUST while the angle number is displayed on the TV screen. You can also select the camera angle by pressing ANGLE button several times. • The angle icon disappears after about 3 seconds if no further selections are made. • To turn off the angle icon Set "On screen display" in the setup menu to "Off" ( page 151). Most of the on-screen display including the angle icon will not appear. While the angle icon is flashing on the front panel display, you can change the camera angle. Notes • You can also change the camera angle during still playback. The camera angle changes to the new setting when you resume normal playback. • If you pause a picture immediately after changing a camera angle, the resumed playback picture may not display the new camera angle. • Depending on a disc, the camera angle may not change even though the angle number changes. 67 Others Function setup Library Editing Playback Recording Introduction