Toshiba RD-XS35SU Owners Manual - Page 71

Introduction Locating by entering the number of a desired section HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD Normally titles, chapters, and tracks are numbered. By entering these numbers, you can access a desired section. 1) Press T.SEARCH. e.g. Title 001 Search Chapter 0001 If you are using a VIDEO CD/audio CD, skip step 2. Recording Playback Editing Library Function setup 2) Press / to select a section (title or chapter) you want to locate. e.g. Title 001 Search Chapter 0001 When you want to locate a chapter. 3) Press the number buttons to enter a number of the section. e.g. To enter 25, press "2", then press "5". 4) Press ENTER. Notes • Pressing CLEAR button resets the numbers. To clear the display, press T.SEARCH button several times (depending on a disc). • This method of locating a title is available only on a disc that contains title numbers. • If a title is erased, the numbers of the following titles decrease respectively. • When you record a new title (Original) on the HDD or a DVD-RAM disc, it is added prior to current titles (Playlist), and each following title (Playlist) reference number will advance by a factor of 1. Locating a specific point by entering its elapsed time (Time Search) HDD DVD-RAM DVD-RW DVD-R DVD-VIDEO VCD CD 1) Press T.SEARCH. You may have to press repeatedly, depending on a disc. Press the button until the following display appears. e.g. Title 001 Search Time 00 : 00 : 00 2) Press the number buttons and / to enter the desired time location on the disc. e.g. To enter 1 hour, 25 minutes, and 30 seconds "0" → "1 2" → "5 3" → "0" hour minute second 3) Press ENTER. Notes • Some discs may not respond to this process. • Some scenes may not be accessed precisely as you specified. • This method for accessing specific locations is available only within the current title of the HDD or a DVD-RAM/R/RW/DVD video disc or within a current track of a VIDEO CD/audio CD. • Pressing CLEAR button resets the numbers. 71 Others