Toshiba RD-XS35SU Owners Manual - Page 200
Introduction, Connections
![]() |
View all Toshiba RD-XS35SU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Introduction Connections Turning the power off Press ON/STANDBY button from the remote control or on the front panel of the recorder. The "Unloading" icon appears on the right corner of the top of the screen, and the ON/STANDBY indicator turns red. Then the power turns off. Note • If the recorder freezes for about 15 minutes and will not respond to any buttons, holding down ON/STANDBY button on the front panel for about 10 seconds can force the recorder to turn off. However, this is an emergency measure, which contains a risk of damage to data or discs. Avoid casual use of this measure. If you try this while the recorder is operating properly, especially while the "Loading" or "Unloading" icon is flashing, it may result in reinitialization of the HDD. Startup/finishing (closing) icons These icons are displayed on the right corner on the top of the screen. While they are flashing, the recorder is operating as follows: Startup, reading a disc, finishing recording Loading Unloading a disc, finishing the recorder's Un operation loading Opening a disc tray Open Closing a disc tray Close If a message appears The recorder may display a message. Each message varies according to operational status. To respond, follow the examples below. Message e.g. message OK e.g. message YOeKs No 2 selections Set Select either response (by highlighting in green) using / buttons, then press ENTER button. The message disappears. e.g. message OK 1 selection Read the message, then press ENTER button. The message disappears. e.g. The message disappears automatically in a few seconds. message No selection Basic setup RD-XS35SU/SC_Inst_E_p29-43 31 06.2.13, 4:33 PM 31
![](/manual_guide/products/toshiba-rdxs35su-owners-manual-9750db5/200.png)