Toshiba RD-XS35SU Owners Manual - Page 210

RD-XS35SU/SC_Inst_E_p29-43 41 4 Press ADJUST (or / ) to set "DBS" to "Not used" or "Use". Not used: When a satellite set top box is not connected to the INPUT3 jacks of the recorder. /ADJUST Skip to step 8. FRAME Use: When a satellite set top box is connected to the INPUT3 jacks of the recorder. 5 Press , then press ADJUST (or / ) to set "IR control" to "On" or "Off". Off: Channels of the satellite set top box are selected by its own selector. ENTER Skip to step 8. On: The recorder can change channels of the satellite set top box. Be sure to make the G-LINK™ connection ( page 25). /ADJUST FRAME 6 Press , then press the number buttons to enter the 3 digits of a brand code of your satellite set top box obtained from the list ( page 43). e.g. If you connect a TOSHIBA satellite set top box: ENTER 0 9 0 1 2 3 4 5 6 7 8 9 0 7 Press , then press ADJUST (or / ) to set "ENTER code" to "On" or "Off". Confirm whether the connected satellite set top box requires ENTER input after digits in channel selection or ENTER not. On: If ENTER input is required. FRAME Off: If ENTER input is not required. /ADJUST (Continued) 41 06.2.13, 4:33 PM Basic setup Connections Introduction