Toshiba Satellite 5105-S607 User Guide - Page 51
Using external display devices, Directing the display output when you turn on the computer
View all Toshiba Satellite 5105-S607 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Getting Started Using external display devices 51 See your printer documentation for additional configuration steps, or see "Setting up a printer" on page 76. Using external display devices Your computer comes with a built-in LCD display, but you can easily attach an external monitor to your computer if you need a larger screen. To do this: 1 Turn off the computer. 2 Connect the monitor's video cable to the RGB (monitor) port on the left side of the computer. 3 Connect the monitor's power cable to a live electrical outlet. 4 Turn on the external monitor. 5 Turn on the computer. 6 Set the display mode by pressing Fn + F5, or by setting the Display Properties settings. Directing the display output when you turn on the computer Once you've connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5). 1 While holding down Fn, press F5 repeatedly until the setting you want takes effect. This hot key cycles through the settings in the following order: ❖ Built-in display panel only ❖ Built-in display panel and external monitor simultaneously ❖ External monitor only