Toshiba Tecra P5 PTS53A-0FT03X Users Manual AU/NZ - Page 157
Diagnostic Mode, SATA Controller Mode, C:\TOSAPINS\Infineon TPM Installation Guide, Disabled, Enabled
View all Toshiba Tecra P5 PTS53A-0FT03X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
HW Setup & BIOS Setup The procedure to follow is as detailed below: 1. Move the cursor to the Clear TPM Owner setting and press either the Space key or BACK SPACE key. 2. A message is displayed at which you should press the Y, E, S, and ENTER keys in sequence - the Trusted Platform Module information will then be erased. 3. The Trusted Platform Module setting will then change from being Enable to Disabled and the setting no longer displayed. When using TPM, please refer to the Infineon TPM Installation Guide from the C:\TOSAPINS\Infineon TPM Installation Guide and ensure that the user reads as it contains usage information and notes on using TPM security. Diagnostic Mode Allows you to set whether the BIOS diagnostic test is enabled or disabled. Disabled The diagnostic test is disabled (Default). Enabled The diagnostic test is enabled. SATA Controller Mode This feature sets the SATA Controller Mode. AHCI Sets AHCI which is the mode for Vista™ (Default). Compatibility Sets the mode for legacy OS. Use this mode when the driver corresponding to AHCI is not used. User's Manual 7-12