Troy-Bilt Bronco CRT Service Manual - Page 9

Drive Belt Replacement, - spark plug

Get Troy-Bilt Bronco CRT PDF manuals and user guides View all Troy-Bilt Bronco CRT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

4. DRIVE BELT REPLACEMENT: 4.1. Remove the spark plug boot from the spark plug and ground it to the engine. See Figure 4.1. Spark Plug Troy-Bilt Small Frame Tillers 4.4. Remove the belt from the engine drive pulley and forward idler pulley. See Figure 4.4. Drive Pulley Forward Idler Pulley Drive Belt Spark Plug Boot Grounded Figure 4.1 4.2. Remove the hex flange screw and large flat washer securing the belt cover to the lower cable mounting bracket using a 3/8" socket. See Figure 4.2. Hex Flange Screw Large Flat Washer Belt Cover Clutch Cable Figure 4.4 4.5. Remove the belt from the transmission pulley. See Figure 4.5. Belt Transmission Pulley Figure 4.2 4.3. Pivot the belt cover on the forward clutch cable until it is out of the work area. Figure 4.5 4.6. Install the new belt in the reverse order above. NOTE: Make certain the belt keepers are correctly positioned prior to installing the belt cover. 4.7. Perform the Forward Clutch Cable Adjustment section. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
Troy-Bilt Small Frame Tillers
5
4.
DRIVE BELT REPLACEMENT:
4.1.
Remove the spark plug boot from the spark plug
and ground it to the engine. See Figure 4.1.
4.2.
Remove the hex flange screw and large flat
washer securing the belt cover to the lower
cable mounting bracket using a 3/8” socket. See
Figure 4.2.
4.3.
Pivot the belt cover on the forward clutch cable
until it is out of the work area.
Figure 4.1
Spark Plug Boot
Grounded
Spark
Plug
Figure 4.2
Hex Flange Screw
Large Flat Washer
Belt Cover
Clutch Cable
4.4.
Remove the belt from the engine drive pulley
and forward idler pulley. See Figure 4.4.
4.5.
Remove the belt from the transmission pulley.
See Figure 4.5.
4.6.
Install the new belt in the reverse order above.
NOTE:
Make certain the belt keepers are cor-
rectly positioned prior to installing the belt cover.
4.7.
Perform the Forward Clutch Cable Adjustment
section.
Figure 4.4
Drive Belt
Drive Pulley
Forward Idler Pulley
Figure 4.5
Transmission
Pulley
Belt