Uniden APPCAM23 English Owner's Manual - Page 19
Detailed Appcam 23 Installation Procedures - appcam 23 recording
View all Uniden APPCAM23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
•• Optimized motion detection range is 6 - 18 feet for the camera. The farther away an object is, the less accurate the motion detection. •• Avoid pointing the camera directly at any bushes, tree branches, or moving objects that might naturally move due to winds. Otherwise, the motion detection feature may record unnecessarily. You can mount the AppCam 23 with the stand on the bottom (on a flat surface such as a table-top), on the side (on a wall), or on the top (on the ceiling or under an eave or overhang). 1. Use your mobile device to test the places where you are considering mounting the camera. Hold the device in that location; if it still receives live video in that spot, the location is good. Attach the camera stand if you have not already done so. 2. Unplug the camera from the power source and install it. 3. After the camera is installed, reconnect power. 4. Attach the Ethernet jack cap. DETAILED AppCam 23 INSTALLATION PROCEDURES Mount the AppCam 23 Base 1. Hold the base of the camera stand where you want to mount it and mark the location of the screw holes. 2. Use the included screws and anchors to attach the base to the wall or ceiling. You can also screw the base into a flat surface such as a tabletop if needed. 19