Uniden APPCAM23 English Owner's Manual - Page 32

If... Motion detection is not working Bright white spots appear at nighttime Try this... • Make sure the sensitivity setting is not turned OFF. (Set sensitivity through the Advanced tab.) • Adjust the sensitivity of the motion sensor. (Set sensitivity through the Advanced tab.) • In motion detection mode, a moving object within the camera viewing angle is necessary to trigger the motion sensor for recording. • Make sure the system date and time have been correctly set. The camera's infrared LEDs produce invisible light that reflects off surfaces such as glass. Install the camera on the other side of windows or place the lens flush against the surface to improve the night vision. Memory card error Please check the environment rating (Ingress) of the camera(s) before installing outdoors. Make sure the memory card is correctly inserted and formatted. Wrong date and time are shown Please backup the data before formatting. This Format function will erase all data on the memory card. • Make sure you've selected the correct time zone. Unexpected date and time can result in an incorrect recording schedule. (See page 25) • Confirm the system date/time of the mobile device to ensure correct operation. 32