Uniden APPCAM23 English Owner's Manual - Page 20
Attach the Camera - AppCam 23
View all Uniden APPCAM23 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. Before attaching the camera, tug gently on the stand to make sure it is securely in place. Attach the Camera - AppCam 23 1. For each AppCam 23, attach the camera bracket to the mounting screw. You can attach the stand 2 Tighten the brace against the camera to secure it in place. to the top or the bottom of the AppCam 23 as needed. Tighten it a few turns, then turn the AppCam 23 to face the direction you want. 3 Loosen the wingnut to unlock the mounting post. 2. Tighten the camera brace up against the AppCam 23 to secure it into place. 1 Attach the camera to the mounting screw and turn it to the desired direction. 4 Adjust the post to the correct angle, then tighten the wingnut to lock the post into place. 3. Unlock the mounting post by turning the wingnut to the left a few turns. 4. Set the mounting post to the correct angle, then tighten the wingnut until the post is locked into place. 5. After the AppCam 23 is installed, reconnect power. 20