Uniden UM425 English Owners Manual - Page 18
Memory, Scanning Channels, 01A,03A,05A,06,07A,08
UPC - 050633501221
View all Uniden UM425 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Getting Started Scan mode You can save channels into memory and then use scan mode to monitor those channels. When the radio detects a signal on a channel, it pauses on that channel as long as the signal is received; when the transmission stops, the radio will continue scanning. When it detects a signal, the radio stays on the channel until you press the CHANNEL UP button or the signal stops. 08 10 11 12 13 14 Resume scan 15 17 20 The radio scans about 5 channels in 1 second. In scan mode, you can get the following information from the display (some indicators will not always be displayed): Transmit power last used All scanned channels must be in memory Normal scan mode or Triple/ Dual-watch on Channel mode (USA, CANadian, or INTernational) 07 1 Watt USA Memory Scanning Channels 01A,03A,05A,06,07A,08 Current channel being scanned Scan list (if the text is too long, the line scrolls) Using the radio in scan mode • You cannot transmit while in scan mode. • You must have two or more channels in memory to start a scan. • To save a channel into memory, select the channel, then press and hold the SCAN-MEM button for two seconds. Memory will show on the display. E-14