Uniden UM425 English Owners Manual - Page 19

Getting Started • To remove a channel from memory, set the radio to that channel, then press and hold the SCAN-MEM button for two seconds. Memory will no longer show on the display. • To activate scan mode, press the SCAN-MEM button. Press the SCAN- MEM button again to return to the previous mode. • When the radio automatically stops on a channel, press the CHANNEL UP button to leave that channel and resume scanning. • To end the scan, press the microphone PUSH TO TALK button or the SCAN-MEM button. The radio remains on the last scanned channel. Scan mode with Weather Alert Watch If you activate Weather Alert Watch while operating in scan mode, the radio checks the most recently-used weather channel every seven seconds, then continues scanning the next channel in memory: Press and hold the WX-ALERT button for two seconds to turn Weather Alert Watch on or off. Scan mode with Triple and Dual Watch If you activate Triple Watch while Press and hold the 16/9-TRI button (on operating in scan mode, the radio the radio or the microphone) for two checks channels 16 and 9 every seconds to turn Triple/Dual Watch on or two seconds, then goes on to off. (To change between Triple or Dual scan the next channel; with Dual Watch, see page 21.) Watch turned on, the radio only checks channel 16: Memory Channel Scan 08 10 11 12 13 14 15 17 20 24 25 Every 2 seconds, the radio checks channels 9 & 16 then goes on to the next channel. 09 16 with Triple Watch on UJR-SeWve2rs0e0Ed6-1115261&5 9 #17