ViewSonic PJ558D PJ558D User Guide - Page 18

Adjusting the Projected Image Adjusting the Projector Height English 2 3 1 The projector is equipped with an elevator foot to adjust the image height. To raise or lower the image: 1. Turn the projector over and locate the elevator foot. Press the elevator button to extend the foot so it may be adjusted. 2. While holding down the elevator button, adjust the foot to the desired height, then release the button to lock the elevator foot into position. 3. Use tilt-adjustment foot to fine-tune tilt-adjustment. 4. Lower the projector so it rests on its foot; adjust as needed. To avoid damaging the projector, make sure that the elevator foot and tiltadjustment foot are fully retracted before placing the projector in its carrying case. 13 ViewSonic PJ558D