ViewSonic PJL855 User Guide - Page 12

OPT. (OPTION) Menu The OPT. Menu allows you to adjust the Communication Function* (COM. SPEED and COM. BITS), enabling you to control the projector from a computer. The OPT. Menu also allows you to set the TIMER , select the LANGUAGE for all on-screen displays, activate AUTO OFF and START UP. OPT. (OPTION) Menu Options Details about Selection Options COM. SPEED (COMMUNICATION) Selects data speed of transmission: 1200, 2400, 4800, 9600, 19200. (Used for computer control of projector) Selects data transmission format: 7N1...7 data bits, No Parity, 1 Stop bit 8N1...8 data bits, No Parity, 1 Stop bit (Used for computer control of projector.) A countdown timer (up to 99 minutes) you can activate whenever needed. The time remaining displays at bottom of the projected picture. Selects language of On-View menus: English, Francais (French), Deutsch (German), Espanol (Spanish), Italiano (Italian), Norsk (Norwegian), Nederlands (Dutch) Sets time (up to 99 minutes) the lamp will automatically turn off and the projector will switch to Standby Mode if an input source is not detected. To disable AUTO OFF, set minutes to 0. Toggles on/off the "ViewSonic® See the Difference" start-up screen (which is displayed each time the projector is powered on). COM. BITS TIMER LANGUAGE AUTO OFF START UP IMPORTANT: If AUTO OFF is activated and shuts off the projector lamp, wait at least one (1) minute. Then press--and briefly hold--the STANDBY/ON button. The lamp will turn back on. * NOTE: Computer control of the projector (communication function) is an advanced feature that requires specialized software not included with the PJL855. To develop this software you will need various control codes and other suplementary information availaible from ViewSonic Customer Support. (See the back of this guide for contact information.) ViewSonic PJL855 Operation 11