ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 17
Installation
![]() |
View all ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Installation Installing the Projector Lens Warning: Do not transport the projector with any lens installed. 1 2 4 3 5 Lens Installing Procedure: 1. Remove the lens ring cover by counter-clockwise rotation. 1 2. Remove the lens cap by counter-clockwise rotation. 2 3. Pull the release bar and push the lens into position. 3 4. Lens assembled by clockwise rotation. 4 5. Lens ring cover assembled by clockwise rotation. 5 Before installing or replacing the lens, switch off the power of the projector. Avoid using the remote control or projector keypad button to adjust the lens shift or zoom/focus while the lens is being attached. 16
![](/manual_guide/products/viewsonic-pro10100-1024-x-768-resolution-6-000-ansi-lumens-126128-throw-ratio-pro10500w-user-guide-0fbe22e/17.png)
16
Installation
Installing the Projector Lens
Lens Installing Procedure:
1.
Remove the lens ring cover by counter-clockwise rotation.
1
2.
Remove the lens cap by counter-clockwise rotation.
2
3.
Pull the release bar and push the lens into position.
3
4.
Lens assembled by clockwise rotation.
4
5.
Lens ring cover assembled by clockwise rotation.
5
Warning: Do not transport the projector with any lens installed.
1
2
3
4
5
Before installing or replacing the lens, switch off the power of the projector.
Avoid using the remote control or projector keypad button to adjust the lens shift or zoom/focus while the
lens is being attached.