ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 68
Replacing the Filter
![]() |
View all ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Replacing the Filter 2 1 Filter Replacing Procedure: 1. Switch off the power to the projector by pressing the " " button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the four screws on the filter cover and pull out the cover. 1 5. Remove the old filter and replace it with the new one. 2 6. Attach the filter cover and secure it with the four included screws. 67
![](/manual_guide/products/viewsonic-pro10100-1024-x-768-resolution-6-000-ansi-lumens-126128-throw-ratio-pro10500w-user-guide-0fbe22e/68.png)
67
Replacing the Filter
Filter Replacing Procedure:
1.
Switch off the power to the projector by pressing the “
” button.
2.
Allow the projector to cool down for at least 30 minutes.
3.
Disconnect the power cord.
4.
Unscrew the four screws on the filter cover and pull out the cover.
1
5.
Remove the old filter and replace it with the new one.
2
6.
Attach the filter cover and secure it with the four included screws.
2
1