ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 22
Warning Indicator, LED Lighting Message
![]() |
View all ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Ratio manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Warning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown: yy "LAMP" LED indicator is lit red and the "ERROR" LED indicator flashes red. This indicates that the lamp has failed. yy "TEMP" LED indicator is lit red and the "ERROR" LED indicator flashes red. This indicates the projector has overheated. Under normal conditions, the projector can be switched back on. yy "TEMP" LED indicator flashes red and the "ERROR" LED indicator flashes red. This indicates that the fan has failed. yy "ERROR" LED indicator flashes red and the "FILTER" LED indicator flashes red. This indicates that the filter needs replacement. yy "FILTER" LED indicator flashes red. This indicates that the filter needs to be cleaned. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up again, please contact your nearest service center for assistance. LED Lighting Message Message Standby State (LAN off) Standby State (LAN On) Power on & Lamp lighting Power off (Cooling) Error (Lamp fail) Error (Over Temp) Error (Fan fail) Error (Filter Switch) Error (Filter Cleaning) Power LED Red Blue Flashing Lamp LED Temp LED Error LED Filter LED Red Red Red Red Flashing Steady light Flashing Steady light Steady light Flashing Flashing Flashing Flashing Flashing Flashing Flashing 21
![](/manual_guide/products/viewsonic-pro10100-1024-x-768-resolution-6-000-ansi-lumens-126128-throw-ratio-pro10500w-user-guide-0fbe22e/22.png)