ViewSonic PRO10100 - 1024 x 768 Resolution 6 000 ANSI Lumens 1.26-1.28 Throw Rat - Page 61

Page 61 highlights

Image has vertical flickering bar `` Use "Frequency" to make an adjustment. `` Check and reconfigure the display mode of your graphic card to make it compatible with the projector. Image is out of focus `` Make sure the lens cover is removed. `` Adjust the Focus function for the projector lens. `` Make sure the projection screen is between the required distance. The image is stretched when displaying 16:9 DVD title `` When you play anamorphic DVD or 16:9 DVD, the projector will show the best image when the projector display mode is set to 16:9 in the OSD. `` If you play 4:3 format DVD titles, please change the format to 4:3 in the projector OSD. `` If the image is still stretched, you will also need to adjust the aspect ratio by referring to the following: `` Please setup the display format as 16:9 (wide) aspect ratio type on your DVD player. Image is too small or too large `` Move the projector closer to or further from the screen. `` Press "Menu" on the control panel. Go to "SCREEN" --> "Aspect"and try the different settings. Image has slanted sides: `` If possible, reposition the projector so that it is centered on the screen and below the bottom of the screen. `` Press the "Keystone" button on the remote control, until the sides are vertical. Image is reversed `` Adjust the "SETTING" --> "Projection" to correct it. 60

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
60
Image has vertical flickering bar
`
Use “Frequency” to make an adjustment.
`
Check and reconfigure the display mode of your graphic card to make it
compatible with the projector.
Image is out of focus
`
Make sure the lens cover is removed.
`
Adjust the Focus function for the projector lens.
`
Make sure the projection screen is between the required distance.
The image is stretched when displaying 16:9 DVD title
`
When you play anamorphic DVD or 16:9 DVD, the projector will show the
best image when the projector display mode is set to 16:9 in the OSD.
`
If you play 4:3 format DVD titles, please change the format to 4:3 in the
projector OSD.
`
If the image is still stretched, you will also need to adjust the aspect ratio by
referring to the following:
`
Please setup the display format as 16:9 (wide) aspect ratio type on your
DVD player.
Image is too small or too large
`
Move the projector closer to or further from the screen.
`
Press “Menu” on the control panel. Go to “SCREEN” --> “Aspect”and try the
different settings.
Image has slanted sides:
`
If possible, reposition the projector so that it is centered on the screen and
below the bottom of the screen.
`
Press the "Keystone" button on the remote control, until the sides are
vertical.
Image is reversed
`
Adjust the “SETTING" --> "Projection” to correct it.