Viking RDMOR200SS Use and Care Manual - Page 32

Control Panel and Settings Multiple Sequence Cooking Your Built-in Microwave Hood can be programmed for up to 4 automatic cooking sequences, switching from one power level setting to another automatically. Sometimes cooking directions tell you to start on one power level and then change to a different power level. Your Built-in Microwave Hood can do this automatically. • Roast beef - cook for 5 minutes at 100% and then continue to cook for 30 minutes at 50%. 1. First enter cooking time. Then touch Power Level pad once for 100% power. 2. Enter second cooking time. Touch Power Level pad 6 times for 50% power. 3. Touch START/Add-A-Minute pad. Note: • If Power Level pad is touched once, HIGH will be displayed. • If 100% is selected as the final sequence, it is not necessary to touch the Power Level pad. • Keep Warm Plus can be programmed even if 4 cooking sequences have been set. More or less time adjustment Should you discover that you like any of the Instant Sensor, Sensor Cook, Defrost, Reheat or Hot Water settings slightly more done, touch the Power Level pad once after touching your choice of pads or before touching START/Add-A-Minute pad. The display will show MORE . Should you discover that you like any of the Instant Sensor, Sensor Cook, Defrost, Reheat or Hot Water settings slightly less done, touch the Power Level pad twice after touching your choice of pads or before touching START/Add-A-Minute pad. The display will show LESS . Operation E 30