Viking RDSCE2305BSS Use and Care Manual - Page 24
Door Replacement and Adjustment, Troubleshooting
View all Viking RDSCE2305BSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Door Replacement and Adjustment 1 2 Reinstall door to range. 3 2 1 2 3 Open door completely. Reinstall hinge trim. 4 Remove pins from hole in hinges. 5 Close door. Troubleshooting Problem Range will not function. Oven does not operate in self-clean. Possible Cause and/or Remedy Range is not connected to electrical power: Have electrician check power circuit breaker, wiring, and fuses. Door is not shut tight enough for automatic door latch to lock. Oven is not clean after selfclean cycle. Temperature control knob not rotated all the way past clean until it stops. Broil does not work. Temperature control knob is rotated too far past broil position. Door will not open. Oven light will not work. Oven is still in self-clean mode. If oven is hot, door latch will release when safe temperature is reached. Light bulb is burned out. Range is not connected to power. Product Care Product Care If the door needs to be adjusted, loosen hinge trim screws (see step 2). Adjust the screws located between the door and kickplate using a 5/32" hex head allen wrench. After adjustment, tighten hinge trim screws. 46 47