Viper 5601 Owner Manual - Page 24

command operations. When locked, if any command button is pressed the remote emits an error tone. • The keypad lock feature is Off when the remote beeps twice and the keypad does not lock. AUX If the keypad lock is On, press , and then press to unlock the keypad. AUX Note: If the auto keypad lock feature is programmed On, the remote un- locks when the vehicle ignition is turned Off. The remote stays unlocked to allow time to exit and unload the vehicle, and then lock the doors with the remote. When the button is pressed, the keypad auto lock feature resumes normally. Remote Beeps feature Press the button to turn the Remote Beeps feature On and Off. A U X AUX When the remote beeps once, the feature is on, the remote then beeps when pressing any button on the remote or when programming features on the remote. When the remote beeps twice, the feature is off, the remote does not beep when pressing any button on the remote but does beep when programming features on the remote. ➤ Panic mode If you are threatened in or near your vehicle, you can attract attention by triggering the system with your transmitter. Just press for 2 seconds, and you will enter Panic Mode. The siren will sound and the parking lights will flash for the programmed siren duration. To stop Panic Mode at any time, press on the remote transmitter again. A U X 24 © 2008 Directed Electronics. All rights reserved. A U X