Viper 5601 Owner Manual - Page 27
Timer mode
View all Viper 5601 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
➤ Timer mode To activate the runtime of the vehicles engine during remote start: Important: Use Timer Mode in open areas only. Never start and run the vehicle in an enclosed space such as a garage or carport. To activate timer mode with an automatic traAUXnsmission: 1. Remote start the vehicle by pressing twice and then press AUX 2. The parking lights flash rapidly four times. 3. After 1 second the car starts and the Timer Mode runs for the specified time period. To activate timer mode with a manual transmission: 1. Enter the MTS mode. 2. Exit the vehicle and arm the alarm. 3. Enter the timer mode. The parking lights quickly flash 4 times to confirm entry into timer mode (vehicle does not remote start at this point). Vehicle begins the timer mode sequence. To exit timer mode AUX with transmitter: • Press twice and then press . PAaUX rking lights flash slowly four times confirming time mode is exited. To exit timer mode without transmitter: 1. Make sure the remote start system is not operating the engine. 2. Turn the ignition on. Timer Mode is exited and the parking lights flash slowly four times. Timer Mode is exited automatically after the sixth run cycle. The parking lights slowly flash 4 times when exiting timer mode. The same procedure may be used to enter or exit Timer Mode using the remote transmitter. © 2008 Directed Electronics. All rights reserved. 27